DCP35-S: DIN Rail Dual Port Signal-Powered RS-232 Line Driver, 1 channel female 9-pin connector, screw terminals termination

DCP35-S
DIN Rail Dual Port Signal-Powered RS-232 Line Driver, 1 channel female 9-pin connector, screw terminals termination

$200.00

Price shown is for small quantities. For large quantities, add to cart and submit an RFQ.

Product Availability:

Description

The DCP35 series of products is designed to allow RS-232 devices to be inter-connected over distances sufficient to cover any industrial or institutional complex of buildings. These line drivers feature a DIN rail mountable enclosure for application to a junction box, a panel, a relay rack, the sides of computer equipment, or anywhere a DIN rail can be mounted.

The DCP35 series does not require a power supply for operation. The use of low power circuits and a sensitive optically isolated receiver allows the devices to derive all necessary power from the RS-232 data and control signals. They are designed for full-duplex, asynchronous operation over two, DC-continuous, non-loaded, twisted-wire pairs. Two-wire simplex operation may be accomplished over one twisted- wire pair. The line driver circuits and, consequently, the host device are protected from electrical transients due to lightning strikes or operation of heavy industrial equipment.

Each device features a convenient DCE (Data Communication Equipment) to DTE (Data Terminal Equipment) switch which reverses pins 2 and 3 of the RS-232 connector. For installation and system troubleshooting each unit has diagnostic Light Emitting Diodes (LEDs) on the transmit and receive lines.

The DCP35 is available in a single or dual channel package. The RS-232 connector may be ordered as a male or female 9-pin connector. Field connection is made through pluggable solderless screw terminals.

Features

  • Signal-powered: No Power Source Required
  • Optical Isolation: Breaks Ground Loops
  • Heavy Duty Surge Protectors: Prevents Lightning Damage
  • LED Diagnostic Indicators: Simplifies Installation and System Troubleshooting
  • 19.2K bps (baud) to 0.5 Mile (0.8km), 9.6K bps to 2.0 Miles (3.3km), 1.2K bps to 7.0 Miles (11.7km)
  • Four-Wire Full Duplex, Two-Wire Simplex
  • Pluggable Solderless Screw Terminal Field Connections
  • Null Modem Switch
  • Single or Dual Channel Package
  • CE Compliant

Block Diagram

FAQ

Frequently Asked Questions


I’m having trouble getting the DCP35 to communicate with a datalogger.
I’m having trouble getting the DCP35 to communicate with a datalogger. To connect to the DCP35, open or download the DCP35 data sheet from the Media Attachments box to the right of this Content box or the DCP35 User Manual from the Media Attachments box to the right of this Content box.
The important aspect of the DCP35 is providing it with sufficient power for it to send data over usable distances at a reasonable data rate.
That said, pay special attention to the power specifications in the data sheet and to the “Power Requirements” and “Cable Capacitance Effects On Distances” sections of the user manual.

Competitive Cross-Reference

  • No cross reference is available.
View Dataforth cross-reference data.
The information available through this competitive cross reference guide are based upon product catalog information obtained from a variety of sources. The competitive cross reference information is being provided to you free of charge for your use. While Dataforth Corp has used reasonable efforts to ensure data accuracy, Dataforth Corp does not guarantee that it is error-free, nor does Dataforth Corp make any other representation, warranty or guarantee that the information is accurate, correct, reliable or up-to-date. Dataforth Corp expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties of merchantability or fitness for a particular purpose.

This information is provided only as a convenience on an "as is" basis and Dataforth Corp. or its representatives or distributors are not responsible for any incorrect, inaccurate, or incomplete information. You are solely responsible for (1) selecting the appropriate Dataforth products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements.

Price shown is for small quantities. For large quantities, add to cart and submit an RFQ.