DSCL24-11

Factory Configurable Isolator, Multi-Channel - DIN or Panel Mount

DSCL24-11
Factory Configurable Isolator, Multi-Channel - DIN or Panel Mount

Description

Each multi-channel DSCL24 module provides up to 252 different configurations of process current or voltage inputs and outputs. The factory default setting provides 0-20mA input and output current. Alternatively, users may complete and submit a specific configuration table that instructs the factory on how to solder in configuration jumpers.

Each module provides full 3-Way isolation with 2300Vrms CMV input to output and 3700Vrms CMV power supply to I/O protection. Two module versions are offered that accept universal power supply of either 24 to 60VDC or AC and 85 to 230VDC or AC with the alternating current usage accepting 45 to 400Hz power.

Specifications

  • Input Range I or V, Factory Configurable
  • Output Range I or V, Factory Configurable
  • Mechanical Format DIN rail,Panel Mount
  • Internal Power Supply None
  • Isolation Voltage 2300 Vrms
  • Isolation Type Transformer 3-way
  • Accuracy < ±0.1% (at 250 Ohm load)
  • Supply Voltage 24 to 60 VDC/AC at 45 to 400 Hz
  • Input Voltage Withstand
  • Gain/Offset Adjust N/A
  • Module Bandwidth 15 Hz
  • NMR (60 Hz) Rejection 16dB at 60Hz
  • External I-to-V Resistor N/A
  • Output Control Continuous
  • Output Resistance
  • Dimensions 5.77 x 4.72 x 0.69 inches
  • Interface Miniature screw terminals
  • Customization no
  • Load Resistance <= 600 Ohms current mode, >= 2 KOhms voltage mode
  • Weight 186 grams (6.56 ounces)

Features

  • Uses Universal Power Supply of 24 to 60V or 85 to 230V AC/DC
  • Factory Configured Soldered Jumpers Allows up to 250+ I/O Settings
  • One Input to Two Output 'Splitter' Simplifies a Common Requirement
  • Three-Way Isolation for 2300Vrms Protection
  • Prevents Ground-Loop Problems
  • Prevents the Transfer of Interference Voltages and Currents
  • High Accuracy Over Full Span
  • No Recalibration or Maintenance Required
  • Narrow DIN Package, Mounts up to 27 Devices into a 19" Rack Space
  • DIN Rail or Panel Mountable

Block Diagram

DSCL24 (multi-channel) block diagram

Competitive Cross-Reference

  • No cross reference is available.
View Dataforth cross-reference data.
The information available through this competitive cross reference guide are based upon product catalog information obtained from a variety of sources. The competitive cross reference information is being provided to you free of charge for your use. While Dataforth Corp has used reasonable efforts to ensure data accuracy, Dataforth Corp does not guarantee that it is error-free, nor does Dataforth Corp make any other representation, warranty or guarantee that the information is accurate, correct, reliable or up-to-date. Dataforth Corp expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties of merchantability or fitness for a particular purpose.

This information is provided only as a convenience on an "as is" basis and Dataforth Corp. or its representatives or distributors are not responsible for any incorrect, inaccurate, or incomplete information. You are solely responsible for (1) selecting the appropriate Dataforth products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements.

FAQ

Due to resource constraints on my computer, I'm unable to open the three dimensional CAD models provided on your website. Does Dataforth provide two demensional CAD models for download as well?
Two dimensional CAD models can be generated upon customer request. Please contact Customer Service for assistance.
How does the load resistance of a module affect the noise at the output?
Noise at the output of a module is independent of load resistance.
Can Dataforth provide calibration reports for modules I purchased?
Yes we can provide calibration reports for the modules that you purchased. You can either a) visit https://www.dataforth.com/TestDataReport.aspx to search for Test Report Datasheets by Serial Number or b) you can send us a list of model numbers and their serial numbers to support@dataforth.com
Does Dataforth have an isolator with one input featuring two or more outputs?
No, but this function can be implemented with a two or three channel loop isolator, such as DSCL22-11, DSCL22-21, DSCL24-11, or DSLC24-12. Connect all inputs in series with each other. Sum together all input burden voltages so as not to exceed the maximum loop voltage available.

Keywords/Phrases: DSCL, DSCL one input multi-output loop isolator, one input multi-output loop isolator
Does Dataforth have a 4-channel 4-20mA isolator?
No. However, Dataforth does have two and three-channel 4-20mA isolators as shown in the following table.

Model Description
DSCL22-11 2-channel 4-20mA isolator
DSCL22-21 3-channel 4-20mA isolator
DSCL23-02 2-channel 4-20mA Isolator with DC Supply for 2-wire transmitter
DSCL24-11 2-channel 4-20mA isolator

Keywords/Phrases: 4-20mA isolator, 4-channel 4-20mA isolator, 4-channel 4-20mA DIN mount isolator

Was this content helpful?
Thank you for your feedback!
Menu
Top