Signal Conditioning
Data Acquisition & Control
4-20mA Transmitters
IoT Power & Energy Monitoring
Data Communications
Power Supplies
Software
DSCP65
DC Low Voltage Converter
DSCP65
DC Low Voltage Converter
Product Availability:
- Usually stock to 3-5 weeks. Contact Customer Service for current lead times.
DSCP65 added to cart.
Description
Each DSCP65 Low Voltage Converter provides a single channel of low voltage input which is converted to a current or voltage output. It is designed for industrial standard voltage or current signals. Input/output range, filter, fault indication, and other functions may be configured by dip-switch. Power can be applied directly to the converter’s terminals or through a DIN rail mounted bus connector accessory, eliminating the need to wire power to each individual converter.
Features
- Input Voltage: 25mV to 2VDC in 15 Settable Steps
- Output Voltage: 0 to 5, 1 to 5, 0 to 10, 2 to 10VDC
- Output Current: 0 to 20, 4 to 20, 20 to 0, 20 to 4mA
- 1500Vrms Galvanic Isolation, 3-Way
- 19.2 to 30VDC Power
- Spring Cage Clamp Connection
- 14-Bit Resolution
- Better than ±0.1% Accuracy
- Configuration by Dip-Switch
- Compact 6.2mm DIN Housing
- CE Compliant
Block Diagram
Documents
Datasheet
DSCP65 DC Low Voltage Converter
DSCP65 DC Low Voltage Converter
Specifications
- Input Type Low Voltage
- Output Type Voltage,Current
- Mechanical Format DIN rail
- Internal Power Supply None
- Isolation Voltage 1500 Vrms
- Isolation Type Transformer 3-way
- Accuracy <±0.1%
- Supply Voltage 19.2 to 30VDC
- Input Voltage Withstand 50V max
- Gain/Offset Adjust
- Module Bandwidth See Data Sheet
- NMR (60 Hz) Rejection Programmable
- External I-to-V Resistor N/A
- Output Control Continuous
- Load Resistance 2k Ohm min (volt) / 500 Ohm max (current)
- Dimensions 3.67 x 0.24 x 4.04 inches
- Interface Cage Clamp Connection
- Customization No
- Weight 44 grams (1.55 ounces)
Accessories
Competitive Cross-Reference
- No cross reference is available.
The information available through this competitive cross reference guide are based upon product catalog information obtained from a variety of sources. The competitive cross reference information is being provided to you free of charge for your use. While Dataforth Corp has used reasonable efforts to ensure data accuracy, Dataforth Corp does not guarantee that it is error-free, nor does Dataforth Corp make any other representation, warranty or guarantee that the information is accurate, correct, reliable or up-to-date. Dataforth Corp expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties of merchantability or fitness for a particular purpose.
This information is provided only as a convenience on an "as is" basis and Dataforth Corp. or its representatives or distributors are not responsible for any incorrect, inaccurate, or incomplete information. You are solely responsible for (1) selecting the appropriate Dataforth products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements.
This information is provided only as a convenience on an "as is" basis and Dataforth Corp. or its representatives or distributors are not responsible for any incorrect, inaccurate, or incomplete information. You are solely responsible for (1) selecting the appropriate Dataforth products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements.
FAQ
Was this content helpful?
Thank you for your feedback!
