SCM9B Series

Isolated, Intelligent Signal Conditioning Products


9B Intelligent Signal Conditioning High quality 9B modules provide cost-effective protection and conditioning for a wide range of distributed data acquisition and control applications including process monitoring and control, remote data logging, product testing, and motion and motor speed control.

Our extensive line includes fixed and programmable sensor-to-computer and computer-to-analog output interface modules, RS-232/RS-485 converters, RS-485 repeaters, and applications software. Accessories include a complete selection of backpanels, DIN rail mounting options, interface cables, mounting racks, power supplies, and other accessory items.

All 9B products are CE Compliant and manufactured per RoHS Directive 2002/95/EC.


These isolated modules provide complete sensor/RS-232C or /RS-485 interfaces with 15-bit measurement resolution. They accept a variety of voltage, current, thermocouple, RTD/thermistor, strain gage, timer/frequency, and multichannel digital inputs/outputs.


These are complete, isolated interfaces designed for remote installation and communication with host computers via standard RS-232C and RS-485 serial ports. They offer 12-bit resolution in a range of analog output voltages and currents.


These products convert RS-232C communication signal levels to the correct RS-485 signal requirements, and may also be configured as repeaters to extend communication bus lengths.

SCM9B Sensor-to-Computer Modules

  • 500Vrms Input Isolation
  • Programmable Scaling and Linearization
  • ASCII Command/Response Protocol
  • 15-bit Measurement Resolution
  • Continuous Self-Calibration
  • Analog Readback
  • DIN Rail Mountable D100 Series

SCM9B Computer-to-Analog Output Modules

  • 0-1V, ±1V, 0-5V, ±5V, 0-10V, ±10V, 0-20mA, 4-20mA Output Ranges
  • 500Vrms Output Isolation
  • 12-bit Output Resolution
  • Programmable 0.01V/s (mA/s) to 10,000V/s (mA/s) Output Slopes
  • Analog Readback
  • Data Scaling

SCM9B Converters and Repeaters

  • Transparent to Host
  • Optically Isolated Bidirectional Data Flows
  • Automatic Internal RS-485 Bus Supervision
  • DIN Rail Mountable D192 Model

SCM9B Series Product Family

Series Datasheet Description
Isolated, Intelligent Signal Conditioning Products
Sensor-to-Computer Modules
Computer-to-Analog Output Modules
4-Channel Sensor-to-Computer Modules
RS-232C/RS-485 Converters, RS-485 Repeaters
DIN Rail Mount Sensor-to-Computer Modules
DIN Rail Mount RS-485 Repeater
24 & 64-Channel Digital I/O Boards
Signal conditioner backpanels and accessories
9B Module Dimensions

Frequently Asked Questions

How to select USB to RS-232 adapters for DTF products?
Contemporary computers do not have RS-232 ports, but USB ports instead. However, there are many USB to RS-232 adapters available.
If the adapter is to be used with a device which uses the Modbus protocol or will be installed in a system which uses the Modbus protocol, the adapter must either be specified for use with Modbus or must be tested on a Modbus device for proper communications functioning.

Selection criteria for Data Acquisition products:

MAQ20-COM2, SLX300-10

These devices have USB ports. If an additional communications channel is needed, a USB RS-232 adapter can be used. The adapter in this case does not need handshake signals included.
These devices both use the Modbus protocol.

Selection criteria for Data Communications products:

DCP485, LDM70, LDM85, LDM422, LDM485

These devices are externally powered and use transmit data, receive data, and ground for communications, and use various handshake signals to control particular functions. Refer to the specific user manual in the Media Attachments area to the right of this Content main body for usage instructions.

DCP35, LDM35, LDM80

These devices are powered from the handshake and the transmit and receive data signals.
The adapter in this case should have the handshake signals included.
If the adapter does not have handshake signals included, use it for the transmit and receive data signals and power the device handshake inputs from separate positive and negative power supplies.
Since the adapter could be installed between two computers and either one could initiate a data transfer, the adapter should be able to allow not only the USB side but also the RS-232 side to initiate the data transfer.


This device is externally powered and uses only transmit data, receive data, and ground for communications. RTS is connected to CTS internally. DTR, DSR, and RLSD (DCD) are connected to each other internally.
The adapter in this case does not need handshake signals included.
If there is a system requirement for handshake signals, then choose an adapter with handshake signals included.

Selection criteria for Signal Conditioning products:


These devices are externally powered and use only transmit data, receive data, and ground for communications. Handshake signals CTS, DSR, and RLSD (DCD or CD) are internally biased to their asserted state or high state, a positive voltage.
The adapter in this case does not need handshake signals included.
If there is a system requirement for handshake signals, then choose an adapter with handshake signals included.

Does Dataforth have any modules with continuous data streaming?
Yes, in the SCM9B series a number of modules can be ordered as continuously data streaming modules. To find out which SCM9B modules can be ordered with the data streaming option, by phone call technical support at 800 444 7644 press 2 or by email at To order a data streaming SCM9B module add a “C” suffix to the model number, example: SCM9B-1251C accepts 4-20mA and provides streaming data on RS-232.

KEYWORDS/PHRASES: streaming, data streaming, continuous data streaming, SCM9B continuous data streaming

Do the SCM9B-A1000 & SCM9B-A2000 have DIN rail mounting?
Neither the SCM9B-A1000 nor the SCM9B-A2000 has DIN rail mounting.
The SCM9B-D192, a DIN rail mountable module, is the closest equivalent of the SCM9B-A2000.

Keywords/Phrases: SCM9B DIN rail mounting, SCM9B DIN rail module

What are the dimensions of the SCM9B series of modules?
The module dimensions of the SCM9B Series can be found on a drawing in www.dataforth,com. In the upper left of the home page under Explore our product offerings, point and click on Signal Conditioning, point and click on 9B Analog to Serial Isolated Modules. In the center column of the next page under SCM9B Series Product Family, click on the Adobe Acrobat symbol to the right of Dimensions. This displays a .pdf drawing of SCM9B module dimensions. The drawing maybe downloaded and saved.

A .pdf of the drawing is also in the Media Attachments box to the right of this topic's main body.

Keywords/Phrases: SCM9B, SCM9B mounting holes, SCM9B mechanical drawing, SCM9B dimensions drawing 9B dimensions drawing

Is there a drawing which can help me locate the SCM9B mounting holes?
There is a mechanical drawing of the SCM9B modules at the end of the 9B data sheets on A .pdf of the drawing is also in the Media Attachments box to the right of the topic main body.